|
| |
COM1Irq=<number>
COM2Irq=<number>
COM3Irq=<number>
COM4Irq=<number>
Default: COM1Irq=4; COM2Irq=3; COM3Irq=4; COM4Irq=3 for ISA and EISA
machines. COM1Irq=4; COM2Irq=3; COM3Irq=3; COM4Irq=3 for
MCA machines
Purpose: Specifies which interrupt line is being used by the device
on the corresponding serial port. Check your hardware
documentation for the appropriate value. If there is a
hardware conflict between ports, set this value to -1 to
disable input for a COM port.
Note: Windows uses these values for both standard and 386
enhanced mode.
To Change: Use the Advanced Settings dialog box for the Ports option in
Control Panel. |